Explore our flagship conductive adhesives and protective encapsulants engineered to eliminate thermal bottlenecks, attenuate high-frequency electromagnetic interference, and ensure structural stability.
Specially optimized for IGBT gate driver boards and industrial inverter control units, delivering structural structural bonding strength combined with high dielectric insulation.
Explore Technical Specs →Engineered with high silver loading to suppress parasitic high-frequency switching noise, offering superior attenuation across broad frequency ranges in industrial inverters.
Explore Technical Specs →Features engineered percolation networks providing ultra-low volume resistivity (<10⁻⁴ Ω·cm) and high thermal dissipation for demanding industrial inverter power blocks.
Explore Technical Specs →Combines high moisture exclusion, chemical resistance, and compliant stress-absorption properties to shield silicon and SiC devices against harsh industrial ambient atmospheres.
Explore Technical Specs →In modern industrial drives, photovoltaic central inverters, wind energy converters, and electrified heavy transportation systems, Insulated Gate Bipolar Transistor (IGBT) power modules serve as the core electro-thermal switching core. Operating under severe conditions characterized by repetitive switching transients, rapid thermal shock cycles, and intense electromagnetic fields, power semiconductors place unprecedented demands on packaging materials. As power density climbs beyond 300 W/cm² and operating junction temperatures (Tj) consistently exceed 150°C to 175°C, traditional solder-based interconnects and passive encapsulants exhibit pronounced degradation modes.
Silver filled epoxy systems have emerged as an indispensable class of functional polymeric materials bridging the gap between mechanical joint integrity, isotropic thermal conductance, and electromagnetic grounding. By suspending precision-engineered, silver micro-flakes and nano-particles inside a chemically tailored epoxy crosslink matrix, these advanced adhesives deliver an optimal compromise between low-temperature curability and high-temperature dimensional reliability.
Formulated with bimodal particle size distributions of silver flakes, maximizing close-packed physical contacts to lower electrical contact resistance below 10⁻⁴ Ω·cm while achieving thermal paths of 10 to 30 W/m·K.
A lower modulus of elasticity compared to metallic solder alloys enables the cured polymeric matrix to cushion thermal expansion coefficient (CTE) mismatch between silicon/SiC dies, DBC substrates, and baseplates.
Provides dense, crosslinked polymer networks that seal IGBT terminal housings, preventing moisture diffusion, ionic contaminant ingress, and high-voltage partial discharge tracking.
Industrial inverters operate in environments subject to harsh external stressors: ambient humidity variations, condensing steam, airborne sulfides, vibration shock, and wide temperature swings from sub-zero start-ups to elevated operating plateaus. In these duty cycles, IGBT modules commonly suffer from three primary structural degradation modes: solder void propagation/fatigue, wire bond lift-off exacerbated by thermal impedance spikes, and housing perimeter hermetic seal failure leading to moisture-induced short circuits.
Silver filled epoxies resolve these failure modes through unique chemical and structural properties:
A direct material comparison highlighting the thermodynamic, electrical, and manufacturing attributes critical for IGBT and inverter engineers.
| Evaluation Parameter | High-Purity Silver Filled Epoxy | Lead-Free Solder (SAC305) | Standard Non-Conductive Epoxy |
|---|---|---|---|
| Thermal Conductivity (W/m·K) | 12 – 28 W/m·K | ~50 – 58 W/m·K | 0.8 – 2.5 W/m·K |
| Volume Resistivity (Ω·cm) | < 5 × 10⁻⁵ | ~ 1.3 × 10⁻⁵ | > 10¹⁴ (Insulating) |
| Processing / Cure Temperature | 120°C – 160°C (Low Thermal Stress) | 240°C – 260°C (High Residual Stress) | 100°C – 150°C |
| CTE Compliance (ppm/°C) | 25 – 45 (Tailored with low Young's Modulus) | ~22 (Rigid metallic bond prone to creep) | 35 – 65 |
| Flux Cleaning Requirement | Zero (100% Solid Solvent-Free) | Mandatory flux cleaning to avert leakage | Zero |
| EMI Shielding Effectiveness | > 65 dB (10 MHz – 18 GHz) | High (Metallic) | Negligible (< 10 dB) |
| Die Shear Strength @ 25°C | > 20 MPa | ~25 – 30 MPa | > 15 MPa |
In multi-megawatt PV farms, utility-scale inverters endure outdoor enclosures where ambient temperatures range from -30°C in winter dawn to +55°C desert sun. Rapid solar irradiation shifts generate harsh dynamic thermal cycling. Silver filled epoxies applied at module cover perimeters and critical DBC interconnects provide an impervious hermetic barrier against condensing dew and blowing dust while guaranteeing continuous heat extraction to cold plates.
Traction drives demand operational lifespans of up to 30 years under continuous physical shock, track vibration, and extreme power surging during locomotive acceleration. By replacing rigid solder preforms with flexible, high-shear-strength silver filled polymer formulations, power packaging engineers insulate brittle SiC and Silicon dies from vibrational fatigue and structural fracture.
In steel rolling mills, deep oil exploration pumps, and chemical processing facilities, inverters are subjected to toxic atmospheric contaminants including hydrogen sulfide and sulfur dioxide. Silver filled epoxy module sealing serves as a non-permeable seal for housing flanges, preventing atmospheric sulfides from reacting with internal copper substrates and preventing catastrophic dendrite shorting.
Modern battery energy storage inverters operate using high switching frequencies to downsize passive magnetic components. These switching frequencies generate intense electromagnetic radiation that can trigger logic errors in adjacent microcontrollers. Silver filled epoxies create an active Faraday cage effect along module perimeters, delivering >60dB electromagnetic shielding effectiveness.
Achieving reproducible performance in high-speed industrial assembly requires strict control over adhesive rheological behavior. Formulations must maintain a precise thixotropic index (typically 4.0 to 6.0) to ensure smooth flow through 25-gauge dispensing needles or automated jetting valves without post-dispense stringing or excessive slump prior to curing.
The curing mechanism involves a temperature-activated latent curing agent. Rather than flash-curing which can trap volatile low-molecular-weight fractions and generate sub-surface voids, a structured multi-stage heating profile is recommended: an initial hold at 90°C to 100°C for gelation and solvent relaxation, followed by a ramp to 150°C to ensure full polymeric crosslinking and optimal silver flake-to-flake percolation contact.
Songxi Technology is a high-tech enterprise specializing in the R&D, production, and sales of electronic adhesives. Based on silicone, polyurethane, acrylic, and epoxy systems, we provide reliable bonding, sealing, and protection solutions for power electronics, optoelectronics, new energy, automotive, and aerospace industries.
We are committed to becoming a trusted provider of functional polymer material solutions for the electronics industry. Through continuous innovation and application development, we promote the localization of high-end electronic adhesives and help intelligent devices achieve greater stability and durability.
Comprehensive chemical formulation platforms tailored to challenging industrial requirements across functional sealing, thermal management, and structural protection.
Songxi's business covers three functional areas: adhesive & sealing, potting & protection, and thermal interface materials. Our product portfolio includes PCBA fixing adhesives, UV adhesives, sealants, thermal conductive potting compounds, thermal greases, pads, two-component thermal gels, EMI shielding sealants, and reactive hot melt adhesives.
Our products serve power batteries, photovoltaic modules, drones, automotive electronics, 5G communications, and LED lighting. We provide both standard products and customized solutions for applications such as BMS conformal coating, IGBT thermal filling, and power battery structural bonding, supported by extensive technical experience and application expertise.
Led by a Ph.D. in Polymer Materials from Sichuan University, Songxi's R&D team has nearly twenty years of silicone application experience and has participated in over 100 product development projects. We maintain cooperation with research institutions including Chenguang Chemical Research Institute, Sichuan University, and Beijing Institute of Technology.
Certified with ISO9001, Songxi operates a comprehensive management system covering procurement, production, inspection, and after-sales service. Our products comply with RoHS and REACH requirements, with SGS verification and UL 94 V-0 flame retardant certification, ensuring consistent quality and reliable delivery.
Automated Planetary Vacuum Centrifugal Mixer
Three-Roll Precision Dispersion Calender
Precision Rheometer & Viscometric Analyzer
High-Accuracy Automated Dispensing System
Thermal Conductivity Laser Flash Flash Apparatus
Constant Temperature & Humidity Testing Chamber
Micro-Volume Dielectric Breakdown Voltage Tester
Thermo-Mechanical Analyzer (TMA / DSC)










Songxi adheres to integrity and quality throughout material selection, production, and delivery, turning reliability into a competitive advantage and earning long-term customer trust through professional service and continuous improvement across global markets.